Ricoh Container Stacker Uživatelská příručka stáhnout pdf (Strana 21)

2.2.2 Decurler Function

The Decurler function lets you specify if certain paper should pass through the decurler path. The

Decurler function has three modes:



AutoSelect

lets the printer determine the Decurler setting (see the table below).

 Enable turns the Decurler function on.

 Disable turns the Decurler function off.

1. To set the Decurler mode, make the following selections from the OCP:

Finisher / Decurler

2. Click on the desired Decurler option, based on the information in the following table.

Decurler mode Auto Select (Default) Enable Disable

Print mode Simplex Duplex Simplex Duplex Simplex Duplex

Less than 28 lbs On Off On On Off Off Paper

Weight

(Bond)

28 lbs – 53 lbs Off Off

On* On* Off Off

* Do not select the Enable option when using paper exceeding 32 lbs. Paper exceeding 32 lbs

cannot be fed through the decurler path.

00LOG 00LOG

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 47 48

Žádné komentáře

Ricoh Container Stacker Uživatelská příručka Strana 21