Ricoh Remote Communication Gate S Instalační příručka Strana 107

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 416
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 106
<Authentication>
Setting Explanation
Authentication type Select a method for authentication.
[None]
Do not perform authentication.
[POP3]
Use a POP3 server for authentication.
[SMTP]
Use the SMTP server specified in [SMTP Server] for
authentication.
Default: [None]
POP server address Enter the IP address or host name of the POP3 server to use for
authentication.
POP server port Enter the port number to use for communication with the POP3 server.
User name Enter the user name for authentication via the POP3 server.
Password Enter the password for authentication via the POP3 server.
SMTP Server connection test
address
Enter an e-mail address to which the test e-mail can be sent. The test
e-mail allows you to check that the settings of the SMTP server are
correct.
SMTP server connection test Click [Test]. A test e-mail will be sent to the e-mail address specified
in [SMTP Server connection test address].
If you have already configured the e-mail settings in Remote Communication Gate S, those settings
will be automatically entered in the above fields.
For details about the e-mail settings in Remote Communication Gate S, see p.60 "Email Settings".
Permit Communication with Communication Server
On the [Permit Communication with Communication Server] screen, you can select whether to allow
communication with the Communication Server. Use this function if you need to temporarily disable
@Remote service.
@Remote Settings
105
3
Zobrazit stránku 106
1 2 ... 102 103 104 105 106 107 108 109 110 111 112 ... 415 416

Komentáře k této Příručce

Žádné komentáře